TreviTandem is the double buck shirt finisher by Trevil. Leveraging our 20 years’ experience and our excellence in shirt finishing, we have developed a rotary machine that offers the same high-quality finish of our blown air shirt finisher, while increasing productivity.
The TreviTandem is equipped with the exclusive SideDry device. The SideDry device is an absolute innovation by Trevil. Not only does it impress vertical tension to the side seams, but it also conveys hot air on them, for faster drying. The result is a perfectly dry shirt, in less time.
As any other Trevil shirt finisher, the TreviTandem does not require skilled labor to be operated. Any operator can learn to use it in a few days.
The intuitive TreviTouch touch-screen interface and the ergonomically optimized work position make the TreviTandem extremely easy and comfortable to use.
The main features of the TreviTandem are:
The TreviTandem can be equipped with an automatic double press for front pockets.
The console is ready for wired or wireless connection to the network. The IronNet software, available as an option, allows to share programs and performance data with the machine.
Real productivity:
50-60 shirts per hour with one operator;
90-100 shirts per hour with two operators.
It is not enough to consider only the cycle time. One must add operator time, that is the time that the operator takes to dress and undress the form, plus the time spent for any touch ups. If the quality of automatic finishing does not allow for the shirt to be delivered straight off the machine, a touch up requiring several minutes may be necessary.
With Trevil, the automation in shirt finishing is reaching high standards of excellence. Our goal is to obtain an impeccably ironed shirts while avoiding manual touch-ups that would negatively affect hourly production.
The SideDry device is an absolute innovation by Trevil. Not only does it provide vertical tension to the side seams, but it also conveys hot air on them, for faster drying. The result is a perfectly dry shirt, in less time.
Adaptive Clamp is the new front hem clamp able to adapt its position for even better finishing quality, without horizontal lines.
The vertical tensioning carriage is equipped with five clamps for perfect and even tensioning around the shirt hem.
The tensioning strength can be adjusted or completely excluded for delicate fabric.
The rear clamp holds the tail of the shirt, two clamps stretch the side seams and two front paddles prevent horizontal lines.
A sensor on the expanders automatically finds the size of the shirt and prevents distortion. It is possible to adjust the tensioning strength of the expanders or to completely exclude it, e.g. for stretch fabric.
Hot air finish of the placket and of the pinces, for a soft and natural look, without unwanted marks.
The angle between the sleeve and the form can be adjusted during the cycle. This is a unique feature, that provides superior finishing quality, combined with high production rates.
All models include special clamps that provide a rounded finish of the short sleeves. A precise tensioning system prevents the deformation of the cuff.
The collar clamp features a convenient notch as an aid to placing the collar correctly. Its shape allows to easily dress and undress polo shirts and T-shirts.
The front clamp presses the shirt placket without damaging buttons.
For better ergonomics, the clamp integrates controls that must be handy during the cycle.
This feature is important to achieve a perfect finish around the armhole without wrinkles on large shirts and with no shoulder impression on smaller ones. The adjustment buttons are both on the front clamp and on the console.
All tensioning movements are controlled electronically and can be adjusted to finish any type of fabric: from heavy cotton to stretch fabrics.
Pop-up messages remind routine maintenance and report anomalies on the console.
A standard size for men’s shirts and a narrow buck for tapered shirts and ladies’ blouses.
It cuts operation costs combining favourably a reduction of drying time and steam saving. It recycles hot air coming from the form and redirects it on the shirt’s critical points: shoulders and yoke seams. The finish is soft and free of wrinkles as there is no contact of metal parts against the fabric. The width of the shoulders can be adjusted while the hood is in operation.
5265 |
5266 |
5267 |
5268 |
|
|---|---|---|---|---|
| Description | S clamps – Regular form | S clamps – Narrow form | FC clamps – Regular form | FC clamps – Narrow form |
| Electrical requirements | 400V 3N 50Hz 220V 3 60Hz |
400V 3N 50Hz 220V 3 60Hz |
400V 3N 50Hz 220V 3 60Hz |
400V 3N 50Hz 220V 3 60Hz |
| Total power | 5,9 kW | 5,9 kW | 6,8 kW | 6,8 kW |
| Blower motor | 2,2 kW 3 HP |
2,2 kW 3 HP |
2,2 kW 3 HP |
2,2 kW 3 HP |
| Suction fan | 0,35 kW 0,5 HP |
0,35 kW 0,5 HP |
0,35 kW 0,5 HP |
0,35 kW 0,5 HP |
| Front clamp | 1000 W x 2 | 1000 W x 2 | 1000 W x 2 | 1000 W x 2 |
| Hood | 0,45 kW 0,6 HP |
0,45 kW 0,6 HP |
0,45 kW 0,6 HP |
0,45 kW 0,6 HP |
| Pocket presses | 0,45 kW x 2 | 0,45 kW x 2 | 0,45 kW x 2 | 0,45 kW x 2 |
| Placket presses | – | – | 0,45 kW x 2 | 0,45 kW x 2 |
| Steam consumption | 50 kg/h 110 lbs/h |
50 kg/h 110 lbs/h |
50 kg/h 110 lbs/h |
50 kg/h 110 lbs/h |
| Air consumption | 30 Nl/cycle 1,06 cfm |
30 Nl/cycle 1,06 cfm |
30 Nl/cycle 1,06 cfm |
30 Nl/cycle 1,06 cfm |
| Steam pressure | 8 bar 116 PSI |
8 bar 116 PSI |
8 bar 116 PSI |
8 bar 116 PSI |
| Air pressure | 600 – 700 kPa 87-100 PSI |
600 – 700 kPa 87-100 PSI |
600 – 700 kPa 87-100 PSI |
600 – 700 kPa 87-100 PSI |
| Footprint | 1780 x 2480 mm 70″ x 98″ |
1780 x 2480 mm 70″ x 98″ |
1780 x 2480 mm 70″ x 98″ |
1780 x 2480 mm 70″ x 98″ |
| Dimensions | 2880 x 2480 x 2250 mm 113″ x 98″ x 89″ |
2880 x 2480 x 2250 mm 113″ x 98″ x 89″ |
2880 x 2480 x 2250 mm 113″ x 98″ x 89″ |
2880 x 2480 x 2250 mm 113″ x 98″ x 89″ |
| Net weight | 720 kg 1587 lbs |
720 kg 1587 lbs |
720 kg 1587 lbs |
720 kg 1587 lbs |
