Presto FC

Presto FC

High productivity Hot Plate shirt unit, up to 60/70 pieces per hour. Must be used in combination with a cuff and collar press.

WATCH VIDEO


Product codes: 5271, 5272

The Presto FC is a hot plate unit that provides high productivity, up to 60/70 shirts per hour, with exceptional quality due to Trevil’s attention to detail.

The layout of the machine allows for fast loading because the operator does not have to change position.

The rear plate reaches the hem of the shirt, providing uniform ironing along its entire length. A special device located inside the shape ensures that the rear hem is stretched to improve the quality of ironing.

MAIN FEATURES

The form is available in two sizes
Trevil electronic programmer

The console is equipped with the new Trevi-Touch touchscreen interface.
The console includes all the controls that are necessary to the operator. Everything is at hand, and easy to use.

Programming and troubleshooting

Store managers or advanced users may have access to full programming. The T-service software included with the machine allows programming and troubleshooting.

Clamps for short and long sleeves with pneumatic adjustment of height and tilt

Sleeve clamps are designed for fast set-up and quality finishing of both long and short sleeves. Cuff plackets presses are covered with anti-shine material.

Rear tensioning system

Presto FC takes special care of the rear of the shirt: the full size rear plate provides an even finish and the pull-down mechanism tensions the fabric. Positioning of the tail is made easy by rear suction.

Easy installation

The design of the cabinet allows to move the machine through a 90 cm (36″) wide door frame.

Pneumatic collar clamp
Side expanders

 

PTFE covered presses to reduce shine on dark colors

OPTIONS

Collar cone

TECHNICAL SPECIFICATIONS

5271
5272
Descrizione Standard shape Large shape
Electrical requirements 400V 3N 50Hz
220V 3 60Hz
400V 3N 50Hz
220V 3 60Hz
Total power 2,8 kW
2,8 kW
2,8 kW
2,8 kW
Blowing power 2,8 kW
3,02 HP
2,8 kW
3,02 HP
Suction power 0,55 kW
0,74 HP
0,55 kW
0,74 HP
Steam consumption 30 kg/h
66 lbs/h
30 kg/h
66 lbs/h
Air consumption 50 Nl/min
1,75 cfm
50 Nl/min
1,75 cfm
Steam pressure 8 bar
116 PSI
8 bar
116 PSI
Air pressure 5 bar
72 PSI
5 bar
72 PSI
Footprint 1930 x 890 mm
76″x 35″
1930 x 890 mm
76″x 35″
Dimensions 3010 x 1315 x 1795 mm
118″x52″x 71″
3010 x 1315 x 1795 mm
118″x52″x 71″
Net weight 684 kg
1507 lbs
684 kg
1507 lbs